1 page 1 3-17-6 ENGINE Models J08C-TP and J08C-TR 14. INSTALL THE FUEL FILTER AND FUEL LINES. Install the fuel lines, oil lines and fuel leakage lines. NOTE: The cylinder number is stamped on the flare nut at the pump side of the injection pipe. SM3-J609 Fig. 21 15. INSTALL THE STARTER. 1. Tighten the bolts and nuts to the specified torque. Tightening torque: 1,570 kg·cm (113 lb·ft) 2. Connect the harness at the alignment marks. SM3-J608 Fig. 22 16. INSTALL THE POWER STEERING OIL PUMP. Tighten the bolts to the specified torque. Tightening torque : 560 kg·cm (40 lb·ft) Fig. 23 SM3-J607