1 page 1 Models J08C-TP and J08C-TR ENGINE 3-6-19 INSTALL THE IDLER GEAR COVER. 1. Clean the cylinder head mounting surface of the idler gear cover. 2. Apply liquid gasket to the idler gear cover, then in- stall it to the cylinder head within 20 minutes. Liquid gasket: ThreeBond No.1207B Coating width: 1.5 - 2.5 mm (0.06 - 0.10 in.) NOTE: MATCHING SURFACE WITH HEAD END HEAD SIDE HOLE LIQUID GASKET SM3-J037 G If left more than 20 minutes, clean off the liquid gas- ket completely and reapply the liquid gasket. G Refer to page 3-20-1. Fig. 63