Hino J08C-TP, J08C-TR — PISTON, CRANKSHAFT AND CYLINDER BLOCK

1 page 1 Models J08C-TP and J08C-TR 3-9-12 ENGINE MEASURE THE CLEARANCE BETWEEN THE PISTON RING AND THE PISTON RING GROOVE. Insert the piston ring into the piston ring groove and meas- ure the clearance between the piston ring and piston ring groove using a feeler gauge. If the value exceeds the limit, measure the width of the piston ring and piston ring groove individually and replace any parts not meeting the limit with new ones. SM3-J545 Fig. 37 SM3-J546 Fig. 38 Unit: mm (in.) Fig. 39 MEASURE THE MATCHING POINT CLEARANCE OF THE PISTON RING. Fit the piston ring into the cylinder liner and measure the matching point clearance of the piston ring using a feeler gauge.

If the value exceeds the limit, replace the piston ring with a new one. SM3-J253 Fig. 40 Piston Ring Gap; Unit:

mm (in.) Clearance Ring thickness Groove width Assembly standard Repair limit Dimension Service limit Dimension Service limit Top ring 0.06-0.10 (0.0024-0.0039) 0.25 (0.0098) 2.5 (0.0984) 2.4 (0.0945) 2.5 (0.0984) 2.7 (0.1063) 2nd ring 0.04-0.08 (0.0016-0.0031) 0.25 (0.0098) 2.0 (0.0787) 1.9 (0.0748) 2.0 (0.0787) 2.2 (0.0866) Oil ring 0.02-0.06 (0.0008-0.0023) 0.15 (0.0059) 4.0 (0.1575) 3.9 (0.1535) 4.0 (0.1575) 4.1 (0.1614) Assembly standard Service limit Top ring 0.3 - 0.40 (0.0119 - 0.0157) 1.5 (0.0590) 2nd ring 0.3 - 0.45 (0.0119 - 0.0177) 1.2 (0.0472) Oil ring 0.3 - 0.45 (0.0119 - 0.0177) 1.2 (0.0472)