4. When engine is started, release the key of ignition switch (1) and the key will return automatically to “ON”. 5. After the engine starts and the engine water temperature is below 20є C (68є F)), the warm-up operation (engine speed: 1130 rpm) is automatically performed. For details, see “STARTING THE ENGINE” on page 2-85. OPERATION Remark Because of the turbo protect function, immediately after the engine starts, even if the accelerator pedal is depressed, the engine speed will not rise above 1130 rpm. The turbocharger rotates at extremely high speed.
Immediately after the engine is started, the pressure of the lubricating oil has not risen sufficiently, so if the engine speed is suddenly raised, it may lead to damage or seizure of the turbocharger bearing. The turbo protect function acts to prevent this problem. It uses electronic control to prevent the engine speed from rising above a certain speed for the first few seconds after the engine started. To improve the ease of starting in cold weather, the low idle speed becomes slightly higher for the time given below and the engine sound is different. In addition, it functions to make the acceleration gradual during this time.
After the engine starts and the engine water temperature is below 20є C (68є F), the warm-up operation (engine speed: 1130 rpm) is automatically performed. When the water temperature goes above 50є C (122є F), the warm-up operation is canceled. Remark The automatic warm-up operation changes as shown in the diagram on the right according to the engine water temperature. WA480-5L 2-87 Engine coolant temperature Turbo protection time above 20º C (68º F) 0 sec. -18º C to 20º C (-0.4º F to 68º F) 0 to 12 sec. Below -18º C (-0.4º F) 15 sec.
Engine coolant temperature Injection characteristics change time above 20º C (68º F) 0 seconds 0º C to 20º C (32º F to 68º F) 0 to 6 seconds -20º C to 0º C (-4º F to 32º F) 6 to 12 seconds -30º C to -20º C (-22º F to -4º F) 12 to 15 seconds