MAINTENANCE KOWA ANALYSIS ITEMS Analysis of metal wear particles. This uses the latest ICP (Inductively Coupled Plasma) analyzer to measure the density of metal wear particles in the oil. Measurement of particle quantity This uses a PQI (Particle Quantifier Index) measurer to measure the quantity of large iron particles (larger than 5 microns) in the oil, which enables the early detection of defect. Others. Measurements are made of items such as the ratio of water in oil or fuel in the oil, and the dynamic viscosity. OIL SAMPLING Sampling interval 250 hours: Engine 500 hours: Other components Precautions when sampling Make sure that the oil is well mixed before sampling.
Perform sampling regularly at fixed intervals. Do not perform sampling on rainy or windy days when water or dust can get into the oil. For further details of KOWA, please contact your Komatsu distributor. STORING OIL AND FUEL Keep indoors to prevent any water, dirt, or other impurities from getting in. When keeping drum cans for a long period, put the drum on its side so that the filler port of the drum can is at the side. This action prevents moisture from being sucked in. If the drum cans have to be stored outside, cover them with a water- proof sheet or take other measures to protect them.
To prevent any change in quality during long-term storage, be sure to use in the order of first in - first out (use the oldest oil or fuel first). 3-14 WA480-5L