MAINTENANCE CHECK ALTERNATOR, STARTER MOTOR The brush may be worn or may be no grease on the bearing, so contact your Komatsu distributor for inspection or repair. If the engine is started frequently, perform an inspection every 1000 hours. CHECK ENGINE VALVE CLEARANCE As special tool is required for removing and adjusting the parts, contact your Komatsu distributor for service. CHECK TURBOCHARGER If there is carbon or oil sludge stuck to the blower impeller, it will lower the performance of the turbocharger or cause it to break, so ask your Komatsu distributor to perform the cleaning. CHECK INJECTOR Check the exhaust gas color visually.
If there is any abnormality in the exhaust gas color, please contact your Komatsu distributor for inspection or replacement. For details of the action to take if there is an abnormality, see “START-UP PROCE- DURES” on page 2-83. CHECK ACCUMULATOR GAS PRESSURE When performing the EVERY 2000 HOURS SERVICE or EVERY YEAR SERVICE or when making periodic replacement of the critical safety parts, please ask your Komatsu distributor to check the accumulator gas pressure. CHECK VIBRATION DAMPER Check that there are no cracks or peeling in the outside surface of the rubber. If any cracks or peeling are found, contact your Komatsu distributor to have the parts replaced. 3-62 WA480-5L