The total value can be cleared as follows. OPTIONS, ATTACHMENTS A. Press the (>) or ( and select the individual items to be cleared from A to E or select the all lighted-up display. B. Press the ( ‘ ) of monitor panel selector switch 1 to display “RESET”. C. “YES NO” is displayed, and the cursor is at the NO position, so press the ( switch 2 to move the cursor to the “Y” of YES. D. Press the ( „ ) of monitor panel mode selector switch 1. The selected individual item from A to E or all the data is cleared. If the monitor accepts the clear command, the buzzer gives short sounds and the display returns to the normal service meter and time display. STOPPING THE CALCULATION 1.
Check that the normal service meter and time are displayed on the character display. 2. Press the ( ‘ ) of monitor panel selector switch 1 and display “LOAD METER”. 3. Press the ( ‘ ) of monitor panel selector switch 1, then press the (>) or ( the bottom line. 4. Press the ( ‘ ) of monitor panel selector switch 1. The load meter display goes out and the screen switches to the speed display. In addition, the character display returns to the normal service meter and time display. 5. When starting the calculation again, set to the addition mode or remain mode. For details, see “SETTING ADDITION MODE” on page 5-7 or “SETTING THE REMAIN MODE” on page 5-8. WA480-5L 5-11