OPTIONS, ATTACHMENTS FORWARD TIME UNIT SELECTOR SWITCH This switch is used to change the unit of time in the forward direction. Use a screwdriver to set this switch. This switch is effective while only in the AUTO/MANUAL selector switch (1) is in the AUTO position. Set it to h , normally, and do not change it unless necessary REVERSE TIME UNIT SELECTOR SWITCH This switch is used to change the unit of time in the reverse direction. Use a screwdriver to set this switch. This switch is effective while only in the AUTO/MANUAL selector switch (1) is in the AUTO position.
Set it to 10s , normally, and do not change it unless necessary SCALE FIGURE SELECTOR SWITCH This switch is used to select the scale figure in unit of time to 1.2, 3, 12, or 30. Use a screwdriver to set this switch. This switch is effective while in the AUTO/MANUAL selector switch (1) is in the AUTO position. Set it to 3, normally. Under this condition, the forward time can be set to 0.3 - 3 hours and the reverse time to 3 - 30 seconds. Setting range of forward and reverse times under each combination of unit of time and scale figure.
5-28 WA480-5L Unit of time s 10s min h Scale figure 1.2 0.05 - 1.2 1.2 - 12 0.12 - 1.2 3 0.3 - 3 3 - 30 0.3 - 3 12 1.2 - 3 12 - 120 1.2 - 12 30 3 - 30 30 -300 3 - 30