OPTIONS, ATTACHMENTS METHOD OF SETTING When setting the various items, the values is not input directly. Select the code number from the set code table below, and set as follows. Setting Code Table Remark When using the machine at ambient temperatures of below -4 degrees Fahrenheit, set to greasing time 9b) at code No. 7. Procedure For Setting 1. Stop the working machine on the flat and hard ground, and stop the engine. 2. Set the safety lock lever at LOCK position and set the starting switch at the ON position. 3. Turn the starting switch to the START and start the engine. 4. Press the level and item keys at the same time to set the setting mode 5.
Press the ITEM key one or more times to select the item to be set. Remark Each time the ITEM key is pressed, the setting item is changed: a->b->c->a. 6. When the item to be set flashes, press the LEVEL key. 7. Refer to the setting code table and press the ITEM key one or more times to select Remark Each time the ITEM key is pressed, the code number (numeric portion) goes up by 1. 8. When the code number that is to be set flashes, press the SET key to carry out the setting. 5-44 WA480-5L