OPTIONS, ATTACHMENTS Replace grease cartridge according to procedure below. 1. Remove cover by turning cartridge cover 91) approx. 60 degrees to the left. 2. Remove grease cartridge (3) by turning it to the left. Do not detach seal cap (4) at this time. 3. Detach cap (5) and middle plug (6) from new grease cartridge and tightly screw it in. Screw in tightly to ensure that no air enters. 4. When fixing, if grease cartridge is pressed slightly and grease comes out and deposits in a heaped shape, and if grease cartridge is screwed into suction port connector under above conditions, no air will enter. (Max No. of turns is approx. 5) 5. Turn the cover to right and tighten it until securely fixed.
If not tightened well, there is a possibility that it will work loose due to machine vibration. Use the grease cartridge shown below. Part No. Capacity 421-S95-3340 1000cc 5-46 WA480-5L Part name Q’ty Cartridge 1