OPERATION TRANSMISSION CUT-OFF SET SWITCH Apply the parking brake before adjusting the transmission cut-off position. Turning the switch (5) to the “ON” position sets the transmission to Neutral and sets the transmission cut-off function, which allows the brake pedal applied position to be adjusted. Position (a): ON Cut-off position can be adjusted When the switch is released, it automatically returns to its original position. For details of the method of adjusting the cut-off position, “ADJUSTING THE TRANSMISSION CUT-OFF” on page 2-98. LAMP SWITCH This (6) is used to light up the head lamps, side clearance lamps, tail lamps, and instrument panel lighting. Position (a): OFF Position (b):
Side clearance lamps, tail lamps, and instrument panel lights up Position (c): Head lamps light up in addition to lamps at b position. Remark The lamp switch can be operated regardless of the position of the lever. TURN SIGNAL LEVER This lever (6) operates the turn signal lamps. Position (a): LEFT TURN: (Push lever FORWARD). Position (b): RIGHT TURN (Pull lever BACK). Remark When the lever is operated, the turn signal pilot lamp will also light up. When the steering wheel is turned to the neutral position, the turn signal lever will return automatically to “OFF”. If not, return the lever to “OFF” manually. WA480-5L 2-35