OPERATION DIMMER SWITCH This (6) switches the head lamp between high beam and low beam. Position (a): Low beam Position (b): High beam HORN BUTTON When the button (7) in the center of the steering wheel is pressed, the horn will sound. HAZARD LAMP SWITCH Use the hazard lamp only in emergencies. Using the hazard lamp when traveling could confuse the drivers of other machines. This switch (8) is used in emergencies, such as the case of emergency parking on the street when the machine breaks down. “ON”: All turn signal lamps flash. PARKING BRAKE SWITCH Always apply the parking brake when leaving the machine or when parking it.
Even if the parking brake switch is turned “ON”, there is danger until the parking brake pilot lamp lights up, so keep the brake pedal depressed. This switch (9) operates the parking brake. Position (a): ON. The parking brake is applied, and the parking brake pilot lamp lights up. Position (b): OFF The parking brake is released. 2-36 WA480-5L