Komatsu — REAR WORKING LAMP SWITCH

OPERATION Never use the parking brake switch to apply the brakes when traveling, except in an emergency. The parking brake may be damaged and this may lead to a serious accident. Apply the parking brake only after the machine has stopped. If the parking brake has been used as an emergency brake when traveling at high speed, contact your Komatsu distributor to have the parking brake checked for any abnormality. Remark When the parking brake is applied, the machine will not move even if the directional lever is operated. If the directional lever is placed at the F or R position with the parking brake still applied, the central warning lamp will light up and the buzzer will sound.

At the same time, “E00 PARKING BRAKE” will be displayed on the character display. Before starting the engine, turn the parking brake switch “ON”, then turn it “OFF” again. FRONT WORKING LAMP SWITCH Always turn the working lamp off before traveling on public roads. When turning the front working lamp “ON”, operate the lamp switch to turn the side clearance lamp “ON” or the head lamp “ON”, then operate this switch (10). Position (a): Working lamp lights up Position (b): Working lamp goes out If position (a) is pressed, the pilot lamp will light up and the working lamp circuit will be switched “ON”.

If the lamp switch is not at the “ON” position for the side clearance lamp or head lamp, the working lamp will not light up. REAR WORKING LAMP SWITCH Always turn the working lamp off before traveling on public roads. When turning the rear working lamp “ON”, operate the lamp switch to turn the side clearance lamp “ON” or the head lamp “ON”, then operate this switch (11). Position (a): Working lamp lights up Position (b): Working lamp goes out If position (a) is pressed, the pilot lamp will light up and the working lamp circuit will be switched “ON”. If the lamp switch is not at the “ON” position for the side clearance lamp or head lamp, the working lamp will not light up. WA480-5L 2-37