MAINTENANCE 24.9.4 CHECK BRAKE DISC WEAR Have your distributor check and repair brake discs. 24.9.5 CHECK ALTERNATOR The brushes and bearings may be worn. Have your distributor inspect and repair. 24.9.6 CHECK STARTER MOTOR The brushes and bearings may be worn. Have your distributor inspect and repair. 24.9.7 CHECK VIBRATION DAMPER The rubber element vibration damper is located at the fan end of the engine 1. Check the index lines (A) on the vibration damper hub (B) and the inertia member (C). If the lines are more than 1.59 mm (1/16 in) out of alignment, replace the vibration damper. Inspect the vibration damper hub (B) for cracks. Replace the vibration damper if the hub is cracked. 2.
Inspect the rubber member for deterioration. If pieces of rubber are missing or if the elastic member is more than 3.18 mm (1/8 in) below the metal surface, replace the vibration damper. 3. Look for forward movement of the vibration damper ring on the hub. Replace the vibration damper if any movement is detected. 24.9.8 REPLACE ELEMENT IN AIR COND. RECIRCULATION AIR FILTER AND FRESH AIR FILTER Remove both the recirculation filter and the fresh air filter in the same way as when cleaning, and replace them with new parts. For details of cleaning the recirculation air filter, see "24.6.3 CLEAN ELEMENT IN AIR CONDITIONER RECIRCULATION FILTER".
For details of cleaning the fresh air filter, see "24.5.2 CLEAN ELEMENT IN AIR CONDITIONER FRESH AIR FILTER". 3-66