ASSEMBLING CONNECTING HOSES BETWEEN BOOM CYLINDER AND MACHINE WARNING: • Stop the engine. Move the control levers back and forth, and right and left several times to release the remaining pressure in the hydraulic line. • Before connecting hoses between the boom cylin- der and the machine, gradually loosen bolts secur- ing the covers to the ends of the hydraulic piping on the machine to release the trapped oil pressure in the piping. 1 Frame 1. Gradually loosen bolts securing the covers to the ends of the hydraulic piping on the machine to release the trapped oil pressure in the piping. Then, remove the cov- ers. M1J7-06-002 2.
Connect four hoses between both the right and left boom cylinders and the machine. 3. Check that hose (1) does not come into contact with the area on the frame. Hose (1) may come into contact with the swing device when the boom cylinder is extended most 6-9