hitachi — 850.indb

ASSEMBLING INSTALLING BOOM CYLINDER ROD 1 2 3 1. Sling right-hand boom cylinder (3) with a crane. 2. Align the rod-pin bore of the boom cylinder (3) with that of boom (2) by moving the boom cylinder up and down while extending or retracting cylinder rod (1). WARNING: • When aligning the centers of the pin and pin hole, never put fingers into the pin hole. • When using a hammer, wear safety equipment such as safety glasses or a hard hat to protect against injury from flying pieces of metal. • When inserting the pin, never enter into the area under the boom cylinder rod. M162-06-022 3.

After driving pin(4) into the pin bore, install pin lock plate (5) onto the right end (the side to which the cylinder rod has been installed) of the pin with bolts (6). Tightening torque: 400 N•m (40 kgf•m, 290 lbf•ft) 4 4. Install the left-hand boom cylinder rod in the same pro- cedure used in the steps 2 to 3. M162-06-021 5 6 M162-06-033 6-10