Transmissions gears. If the vehicle is moving when shifting, de- press the clutch pedal just far enough to disen- gage the clutch. Pressing it to the floor will engage the clutch brake, if so equipped, causing prema- ture clutch brake wear. Eaton Fuller 10-speed range-shift models are not syn- chronized. They have ten forward speeds and two re- verse speeds. The shift lever controls five forward gears and one reverse gear in the transmission front section, and the range lever controls a LO and HI range in the two-speed auxiliary section. The five forward gears se- lected in LO range are used again in HI range to pro- vide the 10 progressive forward gears. See Fig.
5.5 for the direct-drive shift pattern or Fig. 5.6 for the overdrive pattern. Eaton Fuller 9-speed range-shift models are not syn- chronized. They have nine forward speeds and two re- verse speeds. The shift lever controls five forward gears and one reverse gear in the transmission front section, and the range lever controls a LO and HI range in the two-speed auxiliary section. The first position in the front section is used only as a starting gear. The other four ratios are used once in LO range and once again in HI range. See Fig. 5.4 for the shift pattern. HI R 7 9 LO 2 4 N Hi R 5 1 7 3 5 6 8 10 Lo N 1 3 05/01/96 f260119a LOW 6 2 8 4 Fig.
5.5, Shift Pattern, 10-Speed (direct-drive models) 03/12/96 f260093 Eaton Fuller 13-speed range-shift models are not syn- chronized. They have thirteen forward speeds and two reverse speeds. Each transmission consists of a 5-speed front section, and a 3-speed auxiliary section. The auxiliary section contains LO- and HI-range ratios, Fig. 5.4, Shift Pattern, 9-Speed Range-Shift Models 5.3