Freightliner Business Class — Business Class Driver's Manual

Transmissions HI 7 10 Hi R 1 3 Dir OD 5 5 Dir OD 7 7 1 LO R 2 5 Lo N N A 4 6 8 9 B 1 3 2 4 LOW Dir OD Dir OD 6 6 8 8 05/01/96 f260120a 03/13/96 f260044a C D Fig. 5.6, Shift Pattern, 10-Speed (overdrive models) A. HI Range (up) B. LO Range (down) C. Overdrive (forward) D. Direct Drive (aft) 1. Splitter Control Button plus an overdrive splitter gear. See Fig. 5.7 for the shift pattern. All of the thirteen speeds are controlled with one shift lever. Built into the shift knob are a range preselection lever and a splitter control button (on the side of the shift knob). These control range selection and gear splits, respectively. Operation, All Eaton Range-Shift Models Fig.

5.7, Shift Pattern, 13-Speed Models 1. When operating off-highway, or under adverse con- ditions, always use low gear when starting to move the vehicle. Eaton Fuller deep-reduction models are not synchro- nized. They have a five-speed front section and a two- speed auxiliary section which has an extra deep reduc- tion gear. The LO gear in the front section is used only as a starting gear. The other four ratios are used once in LO range and once in HI range giving eight highway ratios. LO-LO is selected by the deep-reduction lever on the dashboard. See Fig. 5.8 for the shift pattern.

For all conditions, use the highest gear that is still low enough to start the vehicle moving with the en- gine idling, and without slipping the clutch exces- sively. 5.4