Transmissions 4. Combination button and lever shift—Preselect the next gear by sliding the shift button rearward. Break torque by releasing the throttle and depressing the clutch pedal. Double-clutching, move the shift lever to the next desired gear position. The combination button and lever shift is used for gear changes from 2nd to 3rd, 4th to 5th, 6th to 7th and 8th to 9th. ing so could result in damage to the engine, trans- mission, and/or driveline. 1. Button shift—With the throttle still applied, preselect the next gear by sliding the shift button rearward. Break torque by releasing the throttle or by de- pressing the clutch pedal.
Increase engine speed to synchronize the engine speed with the transmission speed. The shift will complete when the engine rpm has increased to the proper speed. The button only shift is used for gear changes from 10th to 9th, 8th to 7th, 6th to 5th, 4th to 3rd, and 2nd to 1st. 5. Lever only shift—Break torque by releasing the throttle and depressing the clutch pedal. Double- clutching, move the shift lever to the next desired gear position. Decrease engine speed to synchro- nize the engine speed with the transmission speed. The shift will complete when the engine rpm has decreased to the proper speed. The lever only shift is used to skip a full gear.
With the shift button rearward—1st to 3rd, 3rd to 5th, 5th to 7th, and 7th to 9th. With the shift button forward—2nd to 4th, 4th to 6th, 6th to 8th, 8th to 10th. CAUTION Do not attempt a combination button and lever downshift at too high of an engine speed (generally above 1400 rpm). Doing so could result in damage to the engine, transmission, and/or driveline. NOTE: Lever only shifts skip an entire gear ratio and will require the engine rpm to decrease twice the amount of a normal shift. 2. Combination button and lever shift—With the throttle still applied, preselect the next gear by slid- ing the shift button forward.
Break torque by releas- ing the throttle and depressing the clutch pedal. Double-clutching, move the shift lever to the next desired gear position. The combination button and lever shift is used for gear changes from 9th to 8th, 7th to 6th, 5th to 4th, and 3rd to 2nd. Downshifting CAUTION Do not attempt a button only downshift at too high of an engine speed (generally above 1400 rpm). Do- 5.13