Transmissions handle contains upshift and downshift buttons and a gear select lever detent button. 1 R 4 6 The shifter performs shifts at the front portion of the transmission. It preselects the shift to neutral and completes the gear change after driver input. VOLUME N 2 SERVICE WAIT H D The Electronic Control Unit (ECU) consists of two controllers: a transmission ECU and a system ECU. The transmission ECU controls all transmis- sion shift functions and the system ECU man- ages all vehicle interfaces for transmission shift functions. 3 HOLD L 5 B A An electronic range valve, controlled by the trans- mission ECU, is used to perform range shifts. 02/16/98 f270055 A. Console Top View B.
Select Handle Side View 1. Shift Tone Volume Buttons 2. Indicator Lamps 3. Gear Position Indicator 4. Upshift Button 5. Detent Button 6. Downshift Button Operation, AutoSelect WARNING If the engine cranks in any gear other than neutral, have the vehicle serviced immediately. If the vehicle is started in gear it will suddenly move forward or backward, which could result in personal injury and damage to property and the transmission. Reverse NOTE: To drive in reverse, first depress the clutch. Fig. 5.11, Driver Command Console (DCC) for the three forward positions: drive, hold, and low, plus reverse and neutral positions.
Shift tone volume buttons and service and wait lamps are also located on the console. The gear select 1. Move the gear select lever to the "R" position. 5.15