Freightliner Business Class — Business Class Driver's Manual

Transmissions 2. Select either LO or HI reverse by depressing either the downshift or upshift button ( Fig. 5.11 ) on the gear select handle. 4 SOLID 3. Release the clutch. 1 3 5 SOLID NOTE: The clutch must be used for starting and stopping. 6 SOLID SOLID FLASHING Upshifting ("D" and "H" modes) 2 7 NOTE: It is the driver who decides when to upshift or downshift. When in the "D" mode, an upcoming shift can be cancelled by putting the gear select lever in the "H" mode or by using the gear select handle buttons. When in the "H" mode, it is pos- sible to skip shift gears if the road and load condi- tions permit. A FLASHING 8 SOLID 02/25/98 B F270056 A. Driver Display Module B.

Driver Display Module Detail 1. Decrease Engine RPM Arrows 2. Current Gear Position 3. Increase Engine RPM Arrows 4. 9th Gear Engaged 5. In 9th Gear, Preselected Toward 10th 6. Out Of Gear, Waiting For Engine/Transmission RPM To Synchronize 7. Engine/Transmission RPM Synchronized, Gear Engagement In Process 8. 10th Gear Engaged 1. Accelerate. NOTE: In the "H" mode, depress the upshift button on the gear select handle. Depress twice to skip shift. 2. An audible tone sounds from the Driver Command Console when the transmission is ready to shift. The arrows on the Driver Display Module ( Fig. 5.12 ) indicate the direction engine rpm needs to go to synchronize the next shift.

The next gear is shown on the display. See Fig. 5.12 . Fig. 5.12, Driver Display Module (DDM) 5.16