Freightliner Business Class — Business Class Driver's Manual

Transmissions 3. Release the throttle for the shift to neutral. The up- coming gear flashes on the display when neutral is engaged. The arrows disappear, the current gear position stops flashing, and engine rpm decreases and becomes steady. stops flashing, and engine rpm increases and be- comes steady. 4. Continue decelerating. 4. Apply the throttle. NOTE: If the shift is missed, control engine speed in the direction indicated by the arrows on the dis- play to synchronize engine rpm with the transmis- sion’s speed. NOTE: If the shift is missed, control engine speed in the direction indicated by the arrows on the dis- play to synchronize engine rpm with the transmis- sion’s speed.

Downshifting ("D" and "H" modes with an engine load) Downshifting ("D" and "H" modes without an engine load) 1. Decelerate 1. Decelerate NOTE: In the "H" mode, depress the downshift button on the gear select handle. Depress twice to skip shift. NOTE: In the "H" mode, depress the downshift button on the gear select handle. Depress twice to skip shift. 2. An audible tone sounds from the Driver Command Console when the transmission is ready to shift. The arrows on the Driver Display Module indicate the direction engine rpm needs to go to synchro- nize the next shift. The next gear is shown on the display. 2.

An audible tone sounds from the Driver Command Console when the transmission is ready to shift. The arrows on the Driver Display Module indicate the direction engine rpm needs to go to synchro- nize the next shift. The next gear is shown on the display. 3. Release the throttle. The upcoming gear flashes on the display when neutral is engaged. 4. Apply throttle to synchronize engine rpm with the transmission’s speed. The arrows disappear, the 3. Gently roll on the throttle. The upcoming gear flashes on the display when neutral is engaged. The arrows disappear, the current gear position 5.17