Freightliner Business Class — Business Class Driver's Manual

Fifth Wheels The slide portion of the sliding model may be attached to either an air-operated release slide, or a manual re- lease slide. 1 The air-operated release slide contains an air cylinder that locks and unlocks the fifth wheel slide. See Fig. 8.5 . The air cylinder is activated by a two-position air-control valve in the tractor cab. The manual release slide contains a slide release pull handle, located on the left side of the fifth wheel, which locks or unlocks the fifth wheel slide. See Fig. 8.6 . Fifth Wheel Lock Mechanism for Trailer Kingpin The Fontaine fifth wheel lock mechanism for the trailer kingpin consists of a spring-loaded jaw and a sliding wedge.

The jaw and wedge each have a pin perma- nently attached. The pin on the jaw and the pin on the wedge fit into elongated notches in the lock control handle. The notches in the handle control the limit of movement for both the jaw and wedge. The notches are arranged so that the wedge is actuated first during re- lease of the kingpin. 07/25/95 f310189 2 1. Locking Wedge 2. Air Cylinder Fig. 8.5, Air-Operated Sliding Fifth Wheel Mount, AWB Model During lockup, the jaw is moved first with the spring- loaded wedge being allowed to slip into place against the jaw. A timing bracket ensures that the wedge and jaw are moved at the correct time.

Placing the lock control handle in the unlocked position moves the wedge away from the jaw. This action un- locks the jaw so that it can be moved by the trailer king- pin. When the tractor is moved out from under the trailer, the kingpin moves the jaw until the kingpin is out 8.7