Freightliner Business Class — Business Class Driver's Manual

Fifth Wheels During coupling ( Fig. 8.7 ), the motion of the kingpin en- tering the jaw will actuate the jaw and wedge. The jaw will move behind the kingpin, followed by the wedge. The purpose of the wedge is to reinforce the jaw and take up slack around the pin. Any wear on the jaw is immediately taken up by the wedge so there is no slack in the connection. 1 Fifth Wheel Locking Operation Locking the Fifth Wheel Lock Mechanism CAUTION Before attempting to lock or unlock the fifth wheel lock mechanism of a sliding type fifth wheel, the slide release pull handle, if so equipped, and the slide locking wedges must be in the locked posi- tion.

This prevents the sliding member from moving rapidly to the far forward or rearward position, which could damage the fifth wheel member or kingpin. 07/25/95 f310190 2 1. Locking Wedge 2. Slide Release Pull Handle Fig. 8.6, Manual Release Sliding Fifth Wheel Mount, MWS Model 1. Chock the front and rear of the trailer tires to pre- vent the trailer from moving. of the mechanism. With the jaw in the unlocked posi- tion, the lock control handle will remain in the unlocked position until manually moved by the operator. WARNING Keep the fifth wheel plate lubricated to prevent binding between the tractor and trailer. A binding 8.8