Freightliner Business Class — Business Class Driver's Manual

Fifth Wheels vehicle control, possibly resulting in serious per- sonal injury or death. 2 A 1 2. The kingpin lock mechanism must be fully open, the fifth wheel plate must be completely lubricated with chassis grease. For lubrication instructions, see Group 31 of the Business Class ® Trucks Main- tenance Manual. 3. Position the tractor so that the fifth wheel lock opening is in line (both vertically and horizontally) with the trailer kingpin. The kingpin should be in a position to enter the throat of the locking mecha- nism, as shown in Fig. 8.7 . Adjust the trailer land- ing gear to give enough alignment height for posi- tive kingpin lockup. 3 B C 4.

With the fifth wheel lock opening aligned with the trailer kingpin, back the tractor slowly toward the trailer, making sure that the kingpin enters the throat of the locking mechanism. Continue back- ward motion until positive lockup occurs. 01/04/95 f310184c NOTE: Kingpin correctly entering the lock. Note how the steel tongue allows lock halves to close completely around the neck and shoulder of the kingpin. A. Unlocked Position B. Locking C. Locked 5. Apply the tractor parking brakes. 6. Make a visual and physical check for positive king- pin lockup. When lockup has occurred, the fifth wheel control handle will have moved to the locked position.

Make sure that the safety latch is down over the lock control handle. See Fig. 8.8 . This will hold the control handle in the locked position. 1. Wedge 2. Jaw 3. Trailer Kingpin Fig. 8.7, Fontaine Kingpin Lock Mechanism fifth wheel could cause erratic steering and loss of 8.9