Fifth Wheels 7. Release the tractor parking brakes. Test for kingpin lockup by pulling on the trailer against the chocks. 2 8. After lockup is completed, connect the tractor-to- trailer air system lines and the electrical cable to the trailer. Take care to prevent dirt or foreign mate- rial from entering the air system lines. A 9. Charge the air brake system with air. Make sure that the air connections do not leak. 1 10. With the trailer wheels chocked and the brakes set, check for clearance between the kingpin and the fifth wheel jaws by moving the tractor forward and backward against the locked kingpin. There should be no slack between the tractor and the trailer.
If slack is present, uncouple the trailer. 2 B For adjustment instructions, refer to the applicable manufacturer’s service information. 1 12/05/94 f310265a NOTE: Make sure the safety latch is down when the control handle is locked. WARNING Eliminate slack between the trailer and the tractor. Incorrect fifth wheel adjustment could cause the trailer to disconnect, possibly resulting in serious personal injury or death. A. Unlocked B. Locked 1. Lock Control Handle 2. Safety Latch Fig. 8.8, Fontaine 5000 Series Fifth Wheel, Locking and Unlocking 11. Retract the trailer landing gear, and secure the ratchet handle. Remove the chocks from the trailer tires. 8.10