Freightliner Business Class — Business Class Driver's Manual

Pretrip Inspection and Daily Maintenance 43.7 Government regulations require the removal of front axle tires at 4/32-inch (3-mm) re- maining tread depth and rear axle tires at 2/32-inch (1.5-mm) remaining tread depth. However, front axle tires may be rotated to the drive or trailer axles to use the remaining 2/32-inch (1.5-mm) tread rubber. See Group 40 of the Business Class ® Trucks Service Manual for additional information on tire matching, spacing of dual tires, and causes of abnormal tire wear. f400025a 10/05/94 Fig. 9.16, Dual Assembly Rotation Check the wheel nuts or rim nuts for indications of looseness. Remove all dirt and foreign material from the assembly.

Dirt or rust streaks from the stud holes, metal buildup around stud holes, or out- of-round or worn stud holes, may be caused by loose wheel nuts. See Group 40 of the Business Class ® Trucks Maintenance Manual for torque specifications and the correct tightening sequence. f000265a 10/05/94 Fig. 9.15, Front Axle to Rear Axle Rotation 44. Check for indications of loose wheel nuts or rim nuts and examine each wheel component. 9.31