Pretrip Inspection and Daily Maintenance Examine the wheel assembly components (includ- ing rims, rings, flanges, studs, and nuts) for cracks, or other damage. and crack discs in the stud hole area. Use the rec- ommended torque values and follow the proper tightening sequence. See Group 33 and Group 35 of the Business Class ® Trucks Service Manual for service proce- dures on the studs and hubs and see Group 40 of the Business Class ® Trucks Service Manual for wheel and tire servicing. Replace broken, cracked, badly worn, bent, rusty, or sprung rings and rims. Be sure that the rim base, lockring, and side ring are matched according to size and type. 45.
Check components of the air brake system for cor- rect operation as follows: 45.1 Release the parking brakes on the vehicle by pushing in the parking brake control valve knob. Check the air governor cut-in and cut- out pressures. Run the engine at fast idle. The air governor should cut out the air com- pressor at approximately 125 psi (862 kPa). With the engine idling, make a series of foot valve applications. The air governor should cut in the air compressor at approximately 95 psi (655 kPa). If the air governor does not cut in and out as described above, it must be adjusted to these specifications.
If the air governor cannot be adjusted or re- paired, replace it before operating the ve- hicle. WARNING Have any worn or damaged wheel components re- placed by a qualified person using the wheel manu- facturer’s instructions and the wheel industry’s standard safety precautions and equipment. Other- wise a vehicle or workshop accident could occur, possibly resulting in serious personal injury or death. 45.2 Check the air pressure buildup time as fol- lows: CAUTION For vehicles without a trailer air brake hookup, release the parking brakes on the vehicle by pushing in the parking brake con- trol valve knob.
Insufficient wheel nut (rim nut) torque can cause wheel shimmy, resulting in wheel damage, stud breakage, and extreme tire tread wear. Excessive wheel nut torque can break studs, damage threads, 9.32