MAN — Removing and installing thermostats and water pump

Removing and installing thermostats and water pump Removing thermostats D Drain coolant, see page 49 Fig. 1 Remove the mounting bolts from coolant elbow and from cover on the fluid-cooled exhaust pipe and take off both components together. 1 Figs. 2 and 3 The annular-slide thermostats are inserted in the water-pump housing. Checking thermostats Check the function of the thermostats as follows. D Hang thermostat in a pot filled with water D Heat water D Use suitable thermometer to ascertain the opening start and compare it with the set−point value given in “Engineering S Data S Setting va- lues”. D Measure opening stroke if necessary. 2 Exchange defective thermostats.

Check the function of the thermostats as follows. 3 51