MAN — Removing and installing thermostats and water pump

Removing and installing thermostats and water pump Removing water pump D Drain coolant, see page 49 D Remove heat exchanger, see page 61 D Remove thermostats, see page 51 D Take off V-belt, see page 149 Note: If the water pump is to be disassembled later, remove V-belt pulley before remov- ing the water pump and pull off water pump hub with a stable three-arm puller. 1 Figs. 1 and 2 Remove mounting bolts from water pump (13 mm) and take off water pump. 2 Installing water pump and thermostats Fig. 3 Clean the sealing faces on water pump and engine housing using a scraper and fine abrasive paper. Stick the new seal for the water-pump housing to the crankcase using grease. 3 52