Komatsu — 24.8 EVERY 1000 HOURS SERVICE

24. SERVICE PROCEDURE IF BREATHER IS INSTALLED If the breather is installed at 1 and 4 instead of the relief valve, carry out the lubrication according to the following procedure. 1. Supply grease to the parking brake by carrying out steps 1 to 5 of “24.8.4 LUBRICATING PARKING BRAKE”. 2. If the breather is installed at 1 and 4 , supply grease until the grease is discharged from the breather. REMARK Removal of the grease fitting described in steps 6 and 7 of “24.8.4 LUBRICATING PARKING BRAKE” is not necessary because excessive grease is discharged automatically. 3. To discharge the excessive grease completely, repeat applying and releasing of the parking brake at least five times. 3-72