24. SERVICE PROCEDURE 24.8.5 CHECK TIGHTENING PARTS OF TURBOCHARGER Contact your Komatsu distributor to have the tightening portions checked. 24.8.6 CLEAN FUEL STRAINER 1. Remove plug 1 , then remove spring together with strainer. 2. Remove all dirt from the surface of the strainer, then wash in clean light oil. If strainer is damaged, replace with a new part. 3. Install strainer and spring, then install plug 1 . If O-ring of the plug is damaged, replace with a new part. 24.8.7 TIGHTEN ROPS CANOPY 1. Loosen the bolt, then remove the cover. 2. Check that there is no looseness in mounting bolts 1 of the ROPS canopy. If any bolt is loose, tighten it. Tightening torque:
2746 ± 294 N·m (280 ± 30 kgf·m, 2025 ± 217 lbft) 3. Install the cover. The tightening torque is large, so a power wrench is needed when tightening. Please request your Komatsu distributor to carry out this work. 3-73