Komatsu — 24.9 EVERY 2000 HOURS SERVICE

24. SERVICE PROCEDURE 24.9 EVERY 2000 HOURS SERVICE WARNING Be sure to put a warning tag on work equipment control levers 1 . Maintenance for every 50, 100, 250, 500 and 1000 hours should be carried out at the same time. 24.9.1 CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC FILTER ELEMENT WARNING The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before chang- ing the oil. When removing the oil filler cap, turn it slowly to release the internal pressure, then remove it carefully. Prepare the following. Container to catch drained oil: min. 725 ¬ capacity Refill capacity: 725 ¬ (191.4 US gal) 1.

Lower the bucket horizontally to the ground and apply the parking brake, then stop the engine. 2. Remove the bolt, then remove the cover. 3. Remove the cap of oil filler F and air bleed plug 1 on filter case. 4. Set a container to catch the oil under drain plug 3 . 5. Remove drain plug 3 . 6. Loosen drain valve 2 , then gradually pull it out to drain the oil. 7. After draining the oil, close drain valve 2 , then tighten drain plug 3 . 3-75