24. SERVICE PROCEDURE 24.9.4 CHANGE AXLE OIL WARNING Apply the parking brake, and lock the front and rear frames with the safety bar and pin. Set the work equipment in a stable condition, then stop the engine and apply the locks securely to the work equipment control levers. The oil is at high temperature after the machine has been operated. Always wait for the temperature to go down before starting this operation. Prepare the following. Container to catch drained oil: min. 720 ¬ capacity Refill, capacity (front and rear, each): 360 ¬ (95.0 US gal) 1. Remove front oil filler plugs 1 , then remove drain plugs 2 to drain the oil. 3-80