24. SERVICE PROCEDURE 24.9.7 CHECK WEAR OF BRAKE DISCS WARNING Stop the vehicle on level ground and put blocks under the wheels before checking the wear of the brake discs. Check items Brake oil pressure: Start the engine, then check that the brake oil pressure caution lamp and the central- ized warning lamp are flashing, but that the warning buzzer is not sounding inter- mittently. Check method 1. Remove plug 1 . 2. Depress the brake pedal to the stroke end. 3. Measure depth a of the spring guide below the end of the housing with slide calipers 2 . Keep the brake pedal depressed during measurement. Wear limit (a) = 46.3 mm (1.8 in) (Reference:
Value (a) of new machine = 40.7 ± 1.4 mm (1.6 ± 0.055 in)) If the disc wear approaches the wear limit, check the condition frequently, regardless of the maintenance interval. If the disc wear exceeds the wear limit, please contact your Komatsu distributor for check and maintenance. 3-83