38. HANDLING OF ELECTRICAL WORK EQUIPMENT CONTROL LEVERS 3. LIFT ARM CONTROL LEVER This lever operate the lift arm. Position a : RASISE When the lift arm control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kick- out, and the lever is returned to the HOLD position. Position b : HOLD The lift arm is kept in the same position. Position c : LOWER Position d : FLOAT The lift arm move freely under external force. 4. LEVER STAND Lever stand can be able to move to the front or rear. Amount of adjustment: 50mm (2 in) Adjust angle of lever stand 1.
Loosen lock lever 2 and adjust the lever stand 1 in the desired position. 2. Tighten lock lever 2 5. WRIST REST Wrist arm can be able to adjust the height . Adjustment of lever stand 1. Loosen lock lever 4 and adjust the wrist arm 3 in the desired height. 2. Tighten lock lever 4 REMARK Keep button 5 press and operate lock lever 4 to the FREE position. The lever can be return in desired direction. 5-108