Maintenance section Every 10 Service Hours or Daily You must read and understand the warnings and instructions contained in the Safety section of this manual, before performing any operation or maintenance procedures. Walk-Around Inspection – Inspect 5. Inspect the operator's compartment for loose items and cleanliness. For maximum service lift of the lift truck, make a thorough walk-around inspection. Look around and under the truck for such items as loose or missing bolts, debris or dirt buildup, fuel, oil or coolant leaks and cut gouged tires. Have any repairs made and debris removed, as needed. 1.
Inspect the tires and wheels for cuts, gouges, foreign objects, inflation pressure and loose or missing bolts. 6. Inspect the instrument panel for broken gauges and indicator lights. 7. Test the horn and other safety devices for proper operation. 8. Inspect the cooling system for leaks, worn hoses and debris buildup. 9. Inspect engine compartment for oil, coolant and fuel leaks. 10. Inspect the forks. 2. Inspect the mast and lift chains for wear, broken links, pins and loose rollers. Visually inspect forks for cracks, especially in the heel section, around the mounting brackets, and all weld areas. 3. Inspect the hydraulic system for leaks, worn hoses or damaged lines.
Inspect for broken or jagged fork tips, bent or twisted blades and shanks. 4. Look for transmission and differential leaks on the lift truck and on the ground. Make sure positioning lock is in place and working. Lock the forks in position before using the truck. See “Every 2000 Service Hours or Yearly”. Remove all defective forks from service. 111