CD674 4. Fill a wash pan larger than the ele- ment with a non-flammable solvent; then dip the element in the solvent and wash it. NOTE: Foam Air Filter Cleaner and Foam Air Filter Oil are available from Arctic Cat. GZ018A Draining V-Belt Cover 5. Squeeze the element by pressing it between the palms of both hands to remove excess solvent. Do not twist or ring the element or it will develop cracks. 6. Dry the element. 7. Put the element in a plastic bag; then pour in air filter oil and work the oil into the element. 8. Squeeze the element to remove excess oil. CAUTION A torn air filter can cause damage to the ATV engine. Dirt and dust may get inside the engine if the element is torn.
Carefully examine the element for tears before and after cleaning it. Replace the element with a new one if it is torn. 4. Increase and decrease engine RPM several times to “blow out” any water; then stop the engine. 5. Install the drain bolt and tighten securely. NOTE: The V-belt and pulleys should be inspected every 500 miles and the belt replaced (if necessary). 9. Clean any dirt or debris from inside the air cleaner. 10. Install the air filter/frame assembly and cover. Tires 11. Install the storage compartment and cover. Air Filter Housing Drain Inspect the “duck bill” drain in front of the main housing for debris and for proper sealing. !
WARNING Always use the size and type of tires as specified. Refer to the Specifica- tions chart for proper tire inflation pressure, and always maintain proper tire inflation pressure. 53 DIVISION II - OPERATION/ MAINTENANCE