SERIES 40 ENGINE OPERATOR'S GUIDE SERIES 40 ELECTRONIC CONTROL SYSTEM Series 40 engines use a consolidated engine controller (CEC) and diagnosis system with its own ECM (electronic control module). See Figure 10. Figure 10 Typical Series 40 Engine-Mounted ECM This system functions much like the DDEC system, but is configured differently and uses its own unique diagnostic codes. The diagnostic codes for Series 40 engines are listed in Table 1, Table 2 , Table 3, and Table 4. All information subject to change without notice. (Rev. May 2004) 31 DDC-SVC-MAN-0057 0305 Copyright © 2003 DETROIT DIESEL CORPORATION