SERIES 40 ENGINE OPERATOR'S GUIDE * Indicates WARN Lamp on When Fault Set Table 2 Series 40 Diagnostic Flash Codes (continued) All information subject to change without notice. (Rev. May 2004) 33 DDC-SVC-MAN-0057 0305 Copyright © 2003 DETROIT DIESEL CORPORATION Flash Code Circuit Description 145 CMP CMP Signal Inactive While ICP Has Increased 151 BARO Barometric Press. Signal Out of Range HIGH 152 BARO Barometric Press. Signal Out of Range LOW 154 IAT Air Inlet Temp. Signal Out of Range LOW 155 IAT Air Inlet Temp. Signal Out of Range HIGH 211* EOP Engine Oil Press. Signal Out of Range LOW 212* EOP Engine Oil Press.
Signal Out of Range HIGH 213 SCCS Remote Throttle Signal Out of Range LOW 214 SCCS Remote Throttle Signal Out of Range HIGH 215 VSS Vehicle Speed Signal Freq. Out of Range HIGH 216 HPS Hydraulic Press. Signal Out of Range LOW 221 SCCS Cruise-PTO Control Switch Circuit Fault 225 EOP EOP Sensor Signal In-Range Fault 226 HPS Hydraulic Press. Sensor Signal Out of Range HIGH 231 ATA ATA Data Communication Link Error 236 ECLECL Switch Circuit Fault 241 IPR Injection Control Press. Regulator OCC Self Test Failed 244 EDL Engine to Trans.
Data Line OCC Self Test Failed 246 FAN Engine Fan — OCC Self Test Fault 256 RSE Radiator Shutter Enable OCC Fault 262 COL Change Oil Lamp OCC Fault 263 OWL Oil Water Lamp OCC Fault 265 VRE Vehicle Retarder Relay OCC Fault 266 WEL Engine Warning Light OCC Fault