MAN — Man Series 40 Engine Operator's Guide

SERIES 40 ENGINE OPERATOR'S GUIDE HOW-TO SECTION This section covers Detroit Diesel's recommendations on how to select lubricating oil, fuel oil, and coolant and includes basic engine maintenance procedures which can be performed by the operator. service designation. Only oils licensed to display the API service mark should be used. See Figure 22. Lubricant Requirements NOTICE: The manufacturer's warranty applicable to Series 40 engines provides in part that the provisions of such warranty shall not apply to any engine unit that has been subject to misuse, negligence or accident.

Accordingly, malfunctions attributable to neglect or failure to follow the manufacturer's fuel or lubricating recommendations may not be within the coverage of the warranty. Figure 22 API Lubricant Service Mark API CI-4 or CH-4 oils are recommended for use in all engines. A. How to Select Lubricating Oil Engines Built Prior to 1998 Lubricant Selection in North America Lubricants meeting API Service Category CG-4 may be used in engines built prior to 1998 when API CI-4 or CH-4 oils are not available. The selection of the proper lubricating oil is important to achieve the long and trouble-free service which Detroit Diesel engines are designed to provide.

The proper lubricating oil for all Detroit Diesel engines is selected based on SAE viscosity grade and API (American Petroleum Institute) NOTE: The use of CG-4 oils in these engines may require a reduction in oil drain interval, depending upon the application and the fuel sulfur level. All information subject to change without notice. (Rev. May 2004) 73 DDC-SVC-MAN-0057 0305 Copyright © 2003 DETROIT DIESEL CORPORATION