HOW-TO SECTION Cold Weather Starting available from authorized Detroit Diesel distributors. At ambient temperatures below °F (–20 °C) when sufficient starter speed cannot be achieved with SAE 15W-40 oils, the use of 5W-XX oils and 10W-XX oils, where XX is 30 or 40, is allowed to improve startability, provided they are API CI-4 or API CI-4 or CH-4 and have demonstrated field performance in DDC engines. These oils must possess a HT/HS of 3.7 minimum. The Use of Supplemental Additives Lubricants meeting the Detroit Diesel specifications outlined in this publication already contain a balanced additive treatment. Supplemental additives are generally not necessary and can even be harmful.
These additives may be marketed as either oil treatments or engine treatments and are discouraged from use in Detroit Diesel engines. Engine damage resulting from the use of such materials is not covered by your Detroit Diesel Corporation warranty. Detroit Diesel will not provide statements beyond this publication relative to their use. NOTICE: Monograde oils should not be used in Series 40 engines, regardless of API service classification. Monograde oils gel at lower ambient temperatures, reducing lubricant flow, and they do not provide adequate lubricity at higher engine operating temperatures. These factors can result in severe engine damage.
When the use of high sulfur fuel (greater than 0.05% mass sulfur) is unavoidable, high alkalinity (TBN) lubricants are recommended. High sulfur fuels require modification to oil drain intervals. For further information, refer to publication Engine Requirements – Lubricating Oil, Fuel and Filters , 7SE270, 74 All information subject to change without notice. (Rev. May 2004) DDC-SVC-MAN-0057 0305 Copyright © 2003 DETROIT DIESEL CORPORATION