Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE transfer. idling.

warmed up.) a the the 6 of 4 - 24 NOTIC The oil level differs acco rding to the oil tem perature, s o check the o il level after completing the warming-up operation o f the If th e transfer oil level is l ow, the oil level ma y go below the (B) mark on the "HOT IDLE" side w hen the engine is running a t low e oil level is correct , the oil level will b e between the (A) and (B ) marks on the "H OT ID LE" side when the transfer oil is REMAR When checking the oil le vel with the engin e stopped , follow the p rocedure given below for checking the oil level with the en Check ing Oil Level with Wh en the oil level is checked with th eline, the oil level should be betwee n the (C) and (D ) mar he " COLD STOP " side of dipstick ( Wh en checking the o il level with the e ngine eng ine and wait for at least 2 hours bef ore checking Wh en making the fin al check of the oil level, war abo dips ming-up operation of the transfer, then follo w S teps 1 - ve and check the tick (G).

oil level with the "HOT IDLE" side IDLE" side