John Deere 450CLC Excavator — Operator Station Checks—Engine On

Miscellaneous—Operational Checkout Swing Circuit Leakage Check T6479AZ —UN—19OCT88 Engine at slow idle. Position machine on a side hill or raise one side of machine 300 mm (1 ft) with the boom and ease block under track. Raise bucket 300 mm (1 ft) off the ground at maximum reach. Bottom bucket cylinder and hold lever in the actuated position. NOTE: Actuating the bucket function releases the mechanical swing brake. YES: Go to next check. Does upperstructure move only slightly? NO: Go to your authorized dealer. VD76477,0000057 -19-12SEP12-14/27 Dig Function Drift Check T6290AF —UN—19OCT88 Engine at slow idle. Fill bucket with dirt and position bucket at maximum reach with bucket 2 in.

(50 mm) above ground. Observe bucket for 1 minute. YES: Go to your authorized dealer. Does bucket drift down to ground within 1 minute? NO: Go to next check. VD76477,0000057 -19-12SEP12-15/27 Control Valve Lift Check Test T6292AZ —UN—19OCT88 Engine at slow idle. Position machine as illustrated. Slowly actuate pilot controller to lower boom, extend arm (retract cylinder), and dump bucket (retract cylinder). YES: If functions move in opposite direction first, a leak within the cylinder or lift check valve is indicated. Go to your authorized dealer. Do functions move in opposite direction as control levers are moved, then change direction as levers are moved further? NO: Go to next check.

Continued on next page VD76477,0000057 -19-12SEP12-16/27 4-3-8 060313 PN=150