John Deere 450CLC Excavator — Check Coolant

Maintenance—As Required Check Windshield Washer Fluid Level 1. Check fluid in windshield washer tank (1). If necessary, remove rubber plug located under cover behind cab and remove fill cap to add fluid. 2. Install fill cap. T140231 —UN—21MAR01 3. Install rubber plug. During winter season, use all season windshield washer fluid which will not freeze. 1— Windshield Washer Tank TX14740,0001CF4 -19-20MAR01-1/1 Check Coolant CAUTION: Explosive release of fluids from pressurized cooling system can cause serious burns. Remove surge tank cap only when engine is cold or when cool enough to touch with bare hands. Slowly loosen cap to relieve pressure before removing completely.

TS281 —UN—15APR13 IMPORTANT: John Deere COOL-GARD™II Coolant Extender does not protect against freezing. Coolant extender prevents rust, scale, and liner cavitation. For a more thorough evaluation of coolant, perform COOLSCAN PLUS analysis, where available. See your authorized dealer for information about COOLSCAN PLUS. NOTE: Check coolant every 1000 hours or 1 year, or when replacing 1/3 or more of coolant. Add coolant extender as necessary. 1. Remove surge tank cap and test coolant solution. Use one of the following kits to check coolant. 3-Way Heavy Duty Coolant Test Kit Coolant test strips provide an effective method to check freeze point and additive levels of engine coolant.

See your authorized dealer for 3-Way Heavy Duty Coolant Test Kit and follow instructions on kit. COOLSCAN PLUS 2. Add John Deere COOL-GARD Coolant Extender as necessary. Follow instructions on container for amount. Specification Cooling System—Capac- ity.................................................................................................... 50.0 L 13.2 gal 3. Install surge tank cap. COOL-GARD is a trademark of Deere & Company COOLSCAN PLUS is a trademark of Deere & Company JH91824,0000516 -19-27FEB09-1/1 3-3-6 060313 PN=84