John Deere 450CLC Excavator — Check Travel Gearbox Oil Level

Maintenance—Every 250 Hours Check Swing Gearbox Oil Level 1. Park machine on a level surface. 2. Remove dipstick (1). Oil must be between marks. 3. If oil is needed, remove filler cap (2) and add oil. (See Section 3-1.) T140494 —UN—27MAR01 4. Check oil level. 1— Dipstick 2— Filler Cap TX14740,0001CF5 -19-20MAR01-1/1 Check Travel Gearbox Oil Level 1. Park the machine on level ground rotating travel gearbox until bottom of the oil level check plug (2) is even with the horizontal centerline (4). 2. Stop engine. T134964 —UN—01NOV00 CAUTION: High pressure release of oils from pressurized system can cause serious burns. Wait for travel gearbox oil to cool.

Keep body and face away from check plug (2). Gradually loosen check plug to release air to relieve pressure. 3. After travel gearbox has cooled, slowly loosen check plug to release air to relieve pressure. 1— Fill Plug 2— Check Plug 3— Drain Plug 4— Horizontal Centerline 4. Remove check plug. Oil must be to bottom of hole. 5. If necessary, remove fill plug (1) and add oil until oil flows out of oil level check plug hole. (See Section 3-1.) 7. Check second travel gearbox oil level. 6. Wrap threads of plugs with sealing-type tape. Install plug. Tighten plugs to 70 N·m (51 lb-ft). TX14740,0001CF6 -19-24JAN07-1/1 3-7-1 060313 PN=90