MACHINE TRANSPORT AND STORAGE SECTION 3 Page 5 MACHINE TRANSPORT 3.1. 2. TRANSPORTATION ON TRAILER, RAILWAY CAR OR BY SEA 1. When using automotive trailer or railway car for transportation of a machine, you should take into account state, local and railway regulations obligatory in a particular country or region. If necessary, co-ordinate the details of transportation and safety measures with the competent authorities. 2. During transportation by sea, when it is necessary to carry a loader by means of a crane, use the method of fastening the loader that will ensure maximal safety of persons loading the machine and will not result in damage of the machine.
The lifting slings used for fastening the loader should be attached only to special lifting lugs marked with special plates on the machine (Fig. 3.4). 3.1. 3. TRANSPORTATION BY MACHINE OWN DRIVE 1. Passage conditions must be coordinated with the local road traffic administration. 2. Observe the traffic regulations ensuring a safe travel. 3. Do not drive a loader at long distances. 4. Place the boom and bucket in transport position. 5. Interlock the working system control levers and unlock the articulated frame by setting the frame locking bar in the stowed position as shown in Fig. 3.1. and 3.1.A. 6.
Detailed information on safety precautions when driving – see "SAFETY PRECAUTIONS”, Section 2. 3.2. LIFTING ON SLINGS Fig. 3.4. Method of Handling 515C Loader by a Crane (for a machine equipped with 15.5R25 Tires and 1.53 [m 3 ]. bucket) 1. Frame Locking Bar Machine’s weight Q = 9000 [kG] DRESSTA OM515C520C99/1E