OPERATING SECTION 4 Page 17 INSTRUMENTS AND CONTROLS 34. HYDRAULIC PILOT CONTROL VALVE LOCK SWITCH (Fig. 4.8) The switch has two positions: ON: hydraulic pilot valve is locked OFF: hydraulic pilot valve can be operated 35. CONTROL LEVER LOCKING PLATE (Fig. 4.7) Fig. 4.7 Control Lever Locking Plate (Standard Version) 35. Locking Plate Locking plate (35) is used to lock the control levers in the neutral position and guard them against accidental activation. In the illustration above the plate is shown in the non-locked position. To lock it turn the plate round 180 [ ° ]. WARNING! When roading the machine, engage the hydraulic control lever locking plate.
Accidental actuation of the levers may cause personal injury or damage of the machine. 36. FLOAT POSITION PILOT VALVE LOCK SWITCH This switch has 2 positions: ON: keeps the boom in the float position, OFF: releases the float position lock. Fig. 4.8. Hydraulic Pilot Control Lever Lock Switch (34) and Pilot Valve "Float" Position Lock Switch 1. ON 2. OFF DRESSTA OM515C520C99/1E