John Deere Omar287594 — Clearing IMS Sequence

Implement Management System Aborting IMS Any of the following will cause IMS to shut off (abort): Pressing ON/OFF switch while sequence is executing Pressing LEARN/SAVE switch during execution Pressing the opposite sequence switch during execution Shifting transmission to NEUTRAL position If 60 seconds elapses without operator input during LEARN or SEQUENCE execution mode OURX935,00007C7 ­19­02MAY05­1/1 Clearing IMS Sequence 3. Press SEQUENCE switch. 1. Press IMS ON/OFF switch to ON. 4. Press LEARN/SAVE switch again to clear existing sequence. 2. Press LEARN/SAVE switch. OURX935,00007C8 ­19­02MAY05­1/1 45­7 122208 PN=119