Hitch Hitch Setup and Use (Quick Reference) A B C Once implement is attached, follow these steps for tillage operations; Automatic Powershift SET Adjustments 11:43 AM A Select adjustment to display, change by turning Command Dial (C).
Select height limit by pressing Height/Rate switch (D) once Select drop rate by pressing Height/Rate switch (D) twice Select draft response by pressing LOAD/DEPTH switch (E) ON OFF LEARN SAVE D RXA0087380 —UN—02MAR06 % SLIP PTO SPEED SETTINGS SET LOCK ENG HOURS CLOCK + LOAD/DEPTH E F H G RXA0086166 —UN—26JAN06 Set Operating Depth Lower implement to desired operating depth using Hitch Command lever (I) Press SET switch to save operating depth (G) Turn at End At end of field, pull lever into raise detent and release. Hitch will raise to upper height limit. After turnaround, push lever into lower detent and release. Hitch will lower to saved depth setting.
I A—Display B—Select Switch C—Command Dial D—Height/Rate Switch E—LOAD/DEPTH Switch F—LOCK Switch G—Depth Set Switch H—Vehicle Settings Switch Hitch Command Lever OURX935,0000014 1902JAN081/1 501 122208 PN=120